Thin Film Vacuum Coating

Vacuum Coating by Sputtering

Vacuum Coating by SputteringVacuum coating by sputtering has established a leading position for the deposition of thin films. This is because of its relatively easy scalability to high volumes and sizes, its good control of most layer characteristics, and its wide variety of available materials and possible coating stacks. Moreover, the technology is commonly accepted and widely used in the architectural and automotive industries. However, in display and PV applications, the use of rotatable technology has been introduced more recently.

Within the large area coating business, the rotating cylindrical magnetron concept has proven to offer superior properties relative to the planar concept and to satisfy most industrial requirements. The geometry and sputter performance of rotating cylindrical sputter targets result in several advantages relative to planar sputter targets.

Highly Trained Staff at Kamis Waiting to Assist You!

Kamis is adept at complex composite synthesis and alloy preparation for hot pressed ceramics and vacuum cast targets. We employ a range of melting, crushing, screening, and blending techniques to formulate non-standard and one off R&D compounds. Complete material characterization is performed and provided on all thin film materials. Contact Kamis with any queries concerning Vacuum coating by sputtering.

Coatings are available in a large range for many different applications. The properties of these coatings can and have been improved. This is done by the addition of other elements such as vanadium, yttrium, chromium etc. Also by the development of multilayers by material design. If you have a particular question or request, please do not hesitate to contact Kamis. We always endeavor to accommodate your specific needs.

Our highly trained and certified staff can handle the manufacture of both standard OEM sputter system backing plates and customer-designed units. Customers will receive properly finished sealing surfaces and tight-toleranced dimensions.

Kamis serves the growing demands of the vacuum thin film coating industry. Our commitment to quality products, timely customer service and industry leading deliveries has been the cornerstone of our success. In conclusion, Kamis offers the thin film industry virtually any ceramic, precious, or non-precious PVD material.

Thin Film Deposition Material

Thin Film Deposition Material Supplies From Kamis Inc.

Supplying Thin Film Deposition Material to the Market for Decades!

Thin Film Deposition MaterialAt Kamis we understand your thin film deposition material purchases are extremely important to the success of your company. In addition, choosing the right material company that is in line with your company’s supply chain strategy is just as important. By including Kamis in your company’s supply chain management strategy you can rest assured you have made the right decision.

You need a company that is certified and one that has been supplying deposition materials to market for decades. Your company gets the highest grade materials available in the coating marketplace. Consequently, the advantage of partnering with a company that understands logistics and has material readily available when you need it!

State of the Art Thin Film Deposition Material

State of the art casting techniques allow for an ever-expanding variety of alloys and base metals. Materials are engineered for fine grain structure and low gaseous content. Therefore, 0ur superb grade of PVD materials offers a solution for our customers seeking to minimize volatile contaminates during deposition in a UHV environment.

Kamis has built its reputation on being able to produce difficult and exotic hot pressed sputtering targets and evaporation material. Drawing on decades of powder metallurgy experience we are able to offer a complete range of oxides, nitrides, silicides, carbides, borides, fluorides, sulfides, selenides, and tellurides. As a result, we have the flexibility to produce targets from 1″ diameter to 24″ in diameter, and a limitless combination of squares and rectangles. Materials are pressed to near-net shape. This requires little or no additional machining which could contaminate the starting powders.

The Cornerstone of Quality and Service

The cornerstone on which Kamis was founded is Quality and Service. Kamis is a certified supplier of PVD materials. Consequently, this high quality standard assures our customers of consistent results for their film applications. Finally, Kamis believes in this philosophy and we are constantly striving to provide high quality products to its customers.


Got specific requirements or Questions about sputtering targets, evaporation material, crucible liners, metal foil, sheet, plate, or rod and wire? The technical staff at KAMIS is ready to provide expert knowledge to assist you with your project.

Contact KAMIS today at 845-628-6173 or click the blue button below for quick answers and attention from our knowledgeable staff.

KAMIS prides itself on consistently providing high quality materials and dependable service. We stand behind every product we deliver. If you are ever unsatisfied with your material, contact KAMIS for a full replacement or refund.

Kamis Inc

The entire support staff and sales engineers at KAMIS are always available during business hours. Call us to answer your technical questions and offer guidance on your projects.

Therefore, our expertise and commitment to supplying high quality products and service has enabled KAMIS to earn thousands of satisfied customers around the world.

Thin Film Vacuum Coating

Thin Film Materials From Kamis!

Thin film materials have thousands uses for highly specialized technologies and everyday items.

The thin film material market continues to grow and so does demand. Kamis is the premier source for thin film materials to clients all over the world.Thin Film Materials

The thin film material market is directly influenced by the growth in the end-user industries, such as photovoltaic solar cells, MEMS, electrical, and others. Owing to the increasing demand for photovoltaic solar cells from both mature and emerging economies, the market promises better growth in the coming years. Kamis will be there and prides itself on consistently providing high quality materials and dependable service.

Increased government regulations for renewable energy also contribute to the market growth of the photovoltaic solar cells industry.

Europe represents the single-largest market for thin film material for the same period, followed by North America, and Asia-Pacific.

For All Applications of Thin Film Material

Thin film materials are used in a many ways including evaporation and plating in thin film cell fabrication processes. Kamis serves clients in a variety of industries for use in structural control of compound thin films, sputtering processes, thin film technology, deposition processes and more. Finally, in terms of applications, photovoltaic solar cells, MEMS, semiconductor, electrical and optical coating are major applications of thin film material.


Got specific requirements or Questions about sputtering targets, evaporation material, crucible liners, metal foil, sheet, plate, or rod and wire? The technical staff at KAMIS is ready to provide expert knowledge to assist you with your project.

Contact KAMIS today at 845-628-6173 or click the blue button below for quick answers and attention from our knowledgeable staff.

KAMIS prides itself on consistently providing high quality materials and dependable service. We stand behind every product we deliver. If you are ever unsatisfied with your material, contact KAMIS for a full replacement or refund.

Kamis Inc

The entire support staff and sales engineers at KAMIS are always available during business hours. Call us to answer your technical questions and offer guidance on your projects.

Therefore, our expertise and commitment to supplying high quality products and service has enabled KAMIS to earn thousands of satisfied customers around the world.

Thin Film Vacuum Coating

High Purity Evaporation Material for Research Facilities and Universities

Premier High Purity Evaporation Material Provider

High Purity Evaporation MaterialKamis provides High Purity Evaporation Material for the premier research facilities and universities worldwide. Furthermore, we partner with clients with their needs in mind in order to complete projects on time and within budget. The successful performance of our products is dependent on the customized use of high purity materials for your specific physical vapor deposition processes. Let us know your requirements. Prices determined by market fluctuations and availability, and can give you and immediate quote. Kamis listens and consistently delivers.

High purity evaporation materials from Kamis play a crucial role in the efficiency of the deposition process. And consequently, in the quality of the deposited film. Kamis also provides crucibles in a full range of dimensions and purity for thin film coatings. Finally, with Kamis, our optimized melt properties help result in the improvement of production yields.

For Use in Vacuum Evaporation

PVD coatings from Kamis have high temperature threshold, excellent abrasion resistance, high impact strength and are reliably durable. As a result, our customers are provided with the most recent advances in coating technology along with unparalleled service. Contact us for a variety of shapes and sizes to best fit your coil, boat, or hearth liner. The most common evaporation materials shapes are pellets, granules, rod, wire and starter sources. However, if you need an uncommon shape or size, contact Kamis to see if we can meet your specific requirements.


Got specific requirements or Questions about sputtering targets, evaporation materials, crucible liners, metal foil, sheet, plate, or rod and wire? The technical staff at KAMIS is ready to provide expert knowledge to assist you with your project.

Contact KAMIS today at 845-628-6173 or click the blue button below for quick answers and attention from our knowledgeable staff.

KAMIS prides itself on consistently providing high quality materials and dependable service. We stand behind every product we deliver. If you are ever unsatisfied with your material, contact KAMIS for a full replacement or refund.

Kamis Inc

The entire support staff and sales engineers at KAMIS are always available during business hours to answer your technical questions and offer guidance on your projects.

In conclusion, our expertise and commitment to supplying high quality products and service has enabled KAMIS to earn thousands of satisfied customers around the world.

Thin Film Vacuum Coating

Evaporation Materials for All Your Needs

Best High Quality Evaporation Materials

Evaporation MaterialsKamis Inc. provides a complete range of dimensions and purities when it comes to high quality evaporation materials to help you meet the needs of your organization. Consequently, our expertise and commitment to supplying high quality products and service has enabled Kamis to earn thousands of satisfied customers around the world.

Kamis is the leader in industry standards for PVD materials. Therefore, if you do not see what you need in our product lines in alloys, metals, sputtering targets and evaporation material, contact us. We supply specialty products for broad variety of industries and applications to clients around the world.

Kamis is focused on consistently delivering the best in sputtering targets, evaporation material, crucible liners and other metals. We provide superb customer service. However, if you do not see what you need on the site, contact us. Tell us about the required material, dimensions, purity and composition. Kamis always endeavors to precisely meet your requirements.

World-Class Evaporation Materials

You can always count on world-class solutions for for high purity coatings and the best in service from Kamis. Therefore, we provide high purity evaporation material for use in vacuum evaporation in these industries: Optical, Electronic, Decorate, Superconducting & Others, Metal (Single Element) Evaporation Materials, Alloy (Intermetallics Alloy, Intermetallics) Evaporation Material, Compound Evaporation Materials or Other Evaporation Material.


Got specific requirements or Questions about sputtering targets, evaporation material, crucible liners, metal foil, sheet, plate, or rod and wire? The technical staff at KAMIS is ready to provide expert knowledge to assist you with your project.

Contact KAMIS today at 845-628-6173 or click the blue button below for quick answers and attention from our knowledgeable staff.

KAMIS prides itself on consistently providing high quality materials and dependable service. We stand behind every product we deliver. If you are ever unsatisfied with your material, contact KAMIS for a full replacement or refund.

Kamis Inc

The entire support staff and sales engineers at KAMIS are always available during business hours.  We answer your technical questions and offer guidance on your projects.

Finally, our expertise and commitment to supplying high quality products and service has enabled KAMIS to earn thousands of satisfied customers around the world.

Sputtering Metals for Thin Film Deposits

Sputtering MetalsFind quality sputtering metals for the thin film deposition manufacturing process at Kamis. Sputtering process is used in a variety of applications such as flat panel displays, optical discs, automotive and architectural glass, web coating, hard coatings, optical communications, solar cells, semiconductors, magnetic data storage devices, electron microscopy, and decorative applications.

Typical materials used in these applications and available at Kamis are Copper, Chromium, Chromium-Molybdenum, Aluminium, Titanium, Aluminium-Titanium, Tungsten, Nickel, Silicon, Indium and Silver, amongst others. You have exact and precise purity requirements for your thin film deposition needs. The technical staff at Kamis is ready with expert knowledge to personally help you with your projects.

Sputtering process can be used for depositing thin films from a wide range of materials on to different substrates. Although process parameters make sputtering a complex process, they allow a greater degree of control over the film’s growth and structure. Consequently, Kamis knows the quality of thin film coating is a critical component and depends on obtaining unmatched purity of materials.

Call Kamis for Sputtering Metals and all your Thin Film Vacuum Coating questions.


Contact Kamis

Got specific requirements or Questions about sputtering targets, evaporation material, crucible liners, metal foil, sheet, plate, or rod and wire? The technical staff at KAMIS is ready to provide expert knowledge to assist you with your project.

Therefore, contact KAMIS today at 845-628-6173. Click the blue button below for quick answers and attention from our knowledgeable staff.

KAMIS prides itself on consistently providing high quality materials and dependable service. We stand behind every product we deliver. If you are ever unsatisfied with your material, contact KAMIS for a full replacement or refund.

Kamis Inc

The entire support staff and sales engineers at KAMIS are always available during business hours. Call us to answer your technical questions and offer guidance on your projects.

Finally, our expertise and commitment to supplying high quality products and service has enabled KAMIS to earn thousands of satisfied customers around the world.

Thin Film Vacuum Coating

Thin Film Vacuum Coating on Flat Substrates

Call Kamis With Your Thin Film Vacuum Coating Questions!

Thin Film Vacuum CoatingOver the years, there’s been much research and development in the field of thin film vacuum coating on flat substrates. Consequently, US based KAMIS has been a trusted partner to the vacuum coating industry, top research facilities and universities around the world.

At a recent Fraunhofer FEP, representatives of leading companies, Corning Inc., Saint-Gobain Glass, Schott AG and experts in this field highlighted recent technological achievements. Therefore, an outlook on future trends was provided. New smart products and the global increasing demand for transparent architecture are posing new challenges to the fabrication and handling of flat materials such as glass, flexible glass and polymers.

The technology session will cover the aspects of large-area, homogeneous, dynamic layer deposition, up-scaling of coating processes, in-line process monitoring, deposition of layer systems via sputtering for architectural glazing, lighting, automotive applications and optics.

Read More

Call Kamis for all your Thin Film Vacuum Coating questions.


Contact Kamis

Got specific requirements or Questions about sputtering targets, evaporation material, crucible liners, metal foil, sheet, plate, or rod and wire? The technical staff at KAMIS is ready to provide expert knowledge to assist you with your project.

Therefore, contact KAMIS today at 845-628-6173. Click the blue button below for quick answers and attention from our knowledgeable staff.

KAMIS prides itself on consistently providing high quality materials and dependable service. We stand behind every product we deliver. If you are ever unsatisfied with your material, contact KAMIS for a full replacement or refund.

Kamis Inc

The entire support staff and sales engineers at KAMIS are always available during business hours. Call us to answer your technical questions and offer guidance on your projects.

Finally, our expertise and commitment to supplying high quality products and service has enabled KAMIS to earn thousands of satisfied customers around the world.

Thin Film Deposition Vacuum Process

Thin Film DepositionThe vacuum process of thin film deposition involves the application of coatings of pure materials over the surface of different objects. The thickness of coatings or films typically possess a range of microns and angstroms. Therefore, they can be of single material or a layered structure of multiple materials.

Using quartz crystal monitoring, there are basic principles used to control the thickness and rate of thin film deposition. Secondly, this process is effectively used for many component products like cell phones, screen displays and even eyeglasses. Over the surface pure materials are applied as coatings on varied objects.

The key class of deposition methods is evaporation which involves heating a solid material within a high vacuum chamber in which vapor pressure is produced. Consequently, relatively low vapor pressure is adequate to raise a vapor cloud within the vacuum chamber, which is then condensed over surfaces as a coating or film.

Call Kamis for all your Thin Film Coating questions.


Contact Kamis

Got specific requirements or Questions about sputtering targets, evaporation material, crucible liners, metal foil, sheet, plate, or rod and wire? The technical staff at KAMIS is ready to provide expert knowledge to assist you with your project.

Therefore, contact KAMIS today at 845-628-6173. Click the blue button below for quick answers and attention from our knowledgeable staff.

KAMIS prides itself on consistently providing high quality materials and dependable service. We stand behind every product we deliver. If you are ever unsatisfied with your material, contact KAMIS for a full replacement or refund.

Kamis Inc

The entire support staff and sales engineers at KAMIS are always available during business hours. Call us to answer your technical questions and offer guidance on your projects.

Finally, our expertise and commitment to supplying high quality products and service has enabled KAMIS to earn thousands of satisfied customers around the world.

Thin Film Deposition Material

Depositing Thin Films for Sputtering Targets

Sputtering Targets and Depositing Thin Films from Kamis, Inc.

Sputtering is a unique and repeatable process and has the ability for depositing thin films from a range of materials on to different shapes and sizes of substrates. The process can be upgraded from research and development projects to manufacturing of batches involving medium to large substrate areas.

In order to realize efficient momentum, transfer projectile mass must be able to match target mass. Therefore, for sputtering heavy elements xenon or krypton is used and for light elements neon is utilized. Generally, sputtering gas is an inert gas, such as argon.

Reactive gases utilized for sputtering compounds: The chemical reaction can take place on the substrate or on the target surface depending on the parameters of the process. These parameters make sputter deposition a challenging process, but nevertheless provide experts a greater level of control over the microstructure and growth of the film.

Obtain the required characteristics in a sputter deposited thin film. The production process utilized to build the sputtering target can be of significant importance. Regardless of the fact that the target material has an element, mixture of elements, compound, or alloys, the process undertaken to create that defined material, which is ideal for sputtering thin films of uniform quality, is equally important as the deposition run parameters perfected by scientists and engineers dealing in thin film processes.


Contact Kamis

Got specific requirements or Questions about sputtering targets, evaporation material, crucible liners, metal foil, sheet, plate, or rod and wire? The technical staff at KAMIS is ready to provide expert knowledge to assist you with your project.

Therefore, contact KAMIS today at 845-628-6173.  Click the blue button below for quick answers and attention from our knowledgeable staff.

KAMIS prides itself on consistently providing high quality materials and dependable service. We stand behind every product we deliver. If you are ever unsatisfied with your material, contact KAMIS for a full replacement or refund.

Kamis Inc

The entire support staff and sales engineers at KAMIS are always available during business hours. Call us to answer your technical questions and offer guidance on your projects.

Finally, our expertise and commitment to supplying high quality products and service has enabled KAMIS to earn thousands of satisfied customers around the world.

Sputtered Films and Sputtering Targets

Kamis Sputtered Films for the Deposition of Thin and Sputtered Films

Sputtered FilmsSputtering is one of the most popular technologies for deposition of thin films or Sputtered Films. Although sputtering was first developed about 200 years ago, since World War II it has become increasingly important. This includes the creation of innovative devices. Also becoming fundamental in sustaining the growing demand for semiconductor circuits and other electronic devices.

Sputtering targets have found increasing penetration not in electronics. Additionally, it is in use in sectors such as mechanical/chemical, energy, optical coating, and life science, among others.

Fabrication processes for thin films

For decades sputtering was primarily used in microelectronics for fabrication of semiconductor devices. Though in recent years, the semiconductor industry transitions to new processes that allow for the fabrication of thin films below 20 nm.  Sputtering has found alternative sources of demand in other industry segments. It is used variously in such products as flat panel displays and solar cell manufacturing.

In fact, over time the availability of sputtering materials has expanded. This meets the requirements of the most varied applications within the electronics, mechanical/chemical, energy, optical coatings, life science, and food packaging sectors.


Got specific requirements or Questions about sputtering targets, evaporation material, crucible liners, metal foil, sheet, plate, or rod and wire? The technical staff at KAMIS is ready to provide expert knowledge to assist you with your project.

Therefore, contact KAMIS today at 845-628-6173 or click the blue button below for quick answers and attention from our knowledgeable staff.

KAMIS prides itself on consistently providing high quality materials and dependable service. We stand behind every product we deliver. If you are ever unsatisfied with your material, contact KAMIS for a full replacement or refund.

Kamis Inc

The entire support staff and sales engineers at KAMIS are always available during business hours. Call us to answer your technical questions and offer guidance on your projects.

Finally, our expertise and commitment to supplying high quality products and service has enabled KAMIS to earn thousands of satisfied customers around the world.