Posts

Thin Film Vacuum Coating

Thin Film Sputtering Composition Measure

Thin Film Sputtering Composition Technique in the Sputtering Process

Thin Film SputteringSecondary Ion Mass Spectrometry (SIMS) is a Thin Film Sputtering technique. Used in materials, this science studies the composition of thin films and solid surfaces. Implemented by using the sputtering the sample’s surface with a focused primary ion beam.

In recent years, there has been an increasing interest in studying dopants and contaminants in thin layers near surface in samples. This is due to device structures get smaller and smaller.

SIMS can be used for examining the elementary composition of the surface as well as near surface region of samples. Measured sensitivity is down to parts per billion. In order to get the maximum performance from the device, atmospheric contaminants with low atomic weight such as and oxygen (O), carbon (C), and hydrogen (H) should have low concentration levels.

SIMS: A High Sensitivity Surface Analysis Technique

In SIMS analysis, contamination of hydrocarbons on the surface of the sample to be assessed may produce incorrect results. Hydrocarbons exist abundantly in ambient atmosphere. Therefore, these often deposit on the surface of samples when exposed to air.

During SIMS analysis, the atmospheric contamination on the surface can be embedded into the sample by means of a primary ion beam. Consequently, this contamination leads to distorted or spurious profiles. Therefore, it is very important for operators to know whether they are determining the surface’s composition, or just viewing an artifact caused by contamination.


Got specific requirements or Questions about sputtering targets, evaporation material, crucible liners, metal foil, sheet, plate, or rod and wire? The technical staff at KAMIS is ready to provide expert knowledge to assist you with your project.

Contact KAMIS today at 845-628-6173 or click the blue button below for quick answers and attention from our knowledgeable staff.

KAMIS prides itself on consistently providing high quality materials and dependable service. We stand behind every product we deliver. If you are ever unsatisfied with your material, contact KAMIS for a full replacement or refund.

Kamis Inc

The entire support staff and sales engineers at KAMIS are always available during business hours to answer your technical questions and offer guidance on your projects.

Our expertise and commitment to supplying high quality products and service has enabled KAMIS to earn thousands of satisfied customers around the world.

Thin Film Vacuum Coating

Evaporation Materials for All Your Needs

Best High Quality Evaporation Materials

Evaporation MaterialsKamis Inc. provides a complete range of dimensions and purities when it comes to high quality evaporation materials to help you meet the needs of your organization. Our expertise and commitment to supplying high quality products and service has enabled Kamis to earn thousands of satisfied customers around the world.

Kamis is the leader in industry standards for PVD materials. If you do not see what you need in our product lines in alloys, metals, sputtering targets and evaporation material, contact us. We supply specialty products for broad variety of industries and applications to clients around the world.

Kamis is focused on consistently delivering the best in sputtering targets, evaporation material, crucible liners and other metals while providing superb customer service. If you do not see what you need on the site, contact us about the material, dimensions, purity and composition. Kamis always endeavors to precisely meet your requirements.

You can always count on world-class solutions for for high purity coatings and the best in service from Kamis if you are looking for high purity evaporation material for use in vacuum evaporation in these industries: Optical, Electronic, Decorate, Superconducting & Others, Metal (Single Element) Evaporation Materials, Alloy (Intermetallics Alloy, Intermetallics) Evaporation Material, Compound Evaporation Materials or Other Evaporation Material.


Got specific requirements or Questions about sputtering targets, evaporation material, crucible liners, metal foil, sheet, plate, or rod and wire? The technical staff at KAMIS is ready to provide expert knowledge to assist you with your project.

Contact KAMIS today at 845-628-6173 or click the blue button below for quick answers and attention from our knowledgeable staff.

KAMIS prides itself on consistently providing high quality materials and dependable service. We stand behind every product we deliver. If you are ever unsatisfied with your material, contact KAMIS for a full replacement or refund.

Kamis Inc

The entire support staff and sales engineers at KAMIS are always available during business hours to answer your technical questions and offer guidance on your projects.

Our expertise and commitment to supplying high quality products and service has enabled KAMIS to earn thousands of satisfied customers around the world.