Thin Film Deposition Material

Thin Film Deposition Material Supplies From Kamis Inc.

Supplying Thin Film Deposition Material to the Market for Decades!

Thin Film Deposition MaterialAt Kamis we understand your thin film deposition material purchases are extremely important to the success of your company. In addition, choosing the right material company that is in line with your company’s supply chain strategy is just as important. By including Kamis in your company’s supply chain management strategy you can rest assured you have made the right decision.

You need a company that is certified and one that has been supplying deposition materials to market for decades. Your company gets the highest grade materials available in the coating marketplace. Consequently, the advantage of partnering with a company that understands logistics and has material readily available when you need it!

State of the Art Thin Film Deposition Material

State of the art casting techniques allow for an ever-expanding variety of alloys and base metals. Materials are engineered for fine grain structure and low gaseous content. Therefore, 0ur superb grade of PVD materials offers a solution for our customers seeking to minimize volatile contaminates during deposition in a UHV environment.

Kamis has built its reputation on being able to produce difficult and exotic hot pressed sputtering targets and evaporation material. Drawing on decades of powder metallurgy experience we are able to offer a complete range of oxides, nitrides, silicides, carbides, borides, fluorides, sulfides, selenides, and tellurides. As a result, we have the flexibility to produce targets from 1″ diameter to 24″ in diameter, and a limitless combination of squares and rectangles. Materials are pressed to near-net shape. This requires little or no additional machining which could contaminate the starting powders.

The Cornerstone of Quality and Service

The cornerstone on which Kamis was founded is Quality and Service. Kamis is a certified supplier of PVD materials. Consequently, this high quality standard assures our customers of consistent results for their film applications. Finally, Kamis believes in this philosophy and we are constantly striving to provide high quality products to its customers.


Got specific requirements or Questions about sputtering targets, evaporation material, crucible liners, metal foil, sheet, plate, or rod and wire? The technical staff at KAMIS is ready to provide expert knowledge to assist you with your project.

Contact KAMIS today at 845-628-6173 or click the blue button below for quick answers and attention from our knowledgeable staff.

KAMIS prides itself on consistently providing high quality materials and dependable service. We stand behind every product we deliver. If you are ever unsatisfied with your material, contact KAMIS for a full replacement or refund.

Kamis Inc

The entire support staff and sales engineers at KAMIS are always available during business hours. Call us to answer your technical questions and offer guidance on your projects.

Therefore, our expertise and commitment to supplying high quality products and service has enabled KAMIS to earn thousands of satisfied customers around the world.

Thin Film Vacuum Coating

Thin Film Materials From Kamis!

Thin film materials have thousands uses for highly specialized technologies and everyday items.

The thin film material market continues to grow and so does demand. Kamis is the premier source for thin film materials to clients all over the world.Thin Film Materials

The thin film material market is directly influenced by the growth in the end-user industries, such as photovoltaic solar cells, MEMS, electrical, and others. Owing to the increasing demand for photovoltaic solar cells from both mature and emerging economies, the market promises better growth in the coming years. Kamis will be there and prides itself on consistently providing high quality materials and dependable service.

Increased government regulations for renewable energy also contribute to the market growth of the photovoltaic solar cells industry.

Europe represents the single-largest market for thin film material for the same period, followed by North America, and Asia-Pacific.

For All Applications of Thin Film Material

Thin film materials are used in a many ways including evaporation and plating in thin film cell fabrication processes. Kamis serves clients in a variety of industries for use in structural control of compound thin films, sputtering processes, thin film technology, deposition processes and more. Finally, in terms of applications, photovoltaic solar cells, MEMS, semiconductor, electrical and optical coating are major applications of thin film material.


Got specific requirements or Questions about sputtering targets, evaporation material, crucible liners, metal foil, sheet, plate, or rod and wire? The technical staff at KAMIS is ready to provide expert knowledge to assist you with your project.

Contact KAMIS today at 845-628-6173 or click the blue button below for quick answers and attention from our knowledgeable staff.

KAMIS prides itself on consistently providing high quality materials and dependable service. We stand behind every product we deliver. If you are ever unsatisfied with your material, contact KAMIS for a full replacement or refund.

Kamis Inc

The entire support staff and sales engineers at KAMIS are always available during business hours. Call us to answer your technical questions and offer guidance on your projects.

Therefore, our expertise and commitment to supplying high quality products and service has enabled KAMIS to earn thousands of satisfied customers around the world.

Thin Film Vacuum Coating

High Purity Evaporation Material for Research Facilities and Universities

Premier High Purity Evaporation Material Provider

High Purity Evaporation MaterialKamis provides High Purity Evaporation Material for the premier research facilities and universities worldwide. Furthermore, we partner with clients with their needs in mind in order to complete projects on time and within budget. The successful performance of our products is dependent on the customized use of high purity materials for your specific physical vapor deposition processes. Let us know your requirements. Prices determined by market fluctuations and availability, and can give you and immediate quote. Kamis listens and consistently delivers.

High purity evaporation materials from Kamis play a crucial role in the efficiency of the deposition process. And consequently, in the quality of the deposited film. Kamis also provides crucibles in a full range of dimensions and purity for thin film coatings. Finally, with Kamis, our optimized melt properties help result in the improvement of production yields.

For Use in Vacuum Evaporation

PVD coatings from Kamis have high temperature threshold, excellent abrasion resistance, high impact strength and are reliably durable. As a result, our customers are provided with the most recent advances in coating technology along with unparalleled service. Contact us for a variety of shapes and sizes to best fit your coil, boat, or hearth liner. The most common evaporation materials shapes are pellets, granules, rod, wire and starter sources. However, if you need an uncommon shape or size, contact Kamis to see if we can meet your specific requirements.


Got specific requirements or Questions about sputtering targets, evaporation materials, crucible liners, metal foil, sheet, plate, or rod and wire? The technical staff at KAMIS is ready to provide expert knowledge to assist you with your project.

Contact KAMIS today at 845-628-6173 or click the blue button below for quick answers and attention from our knowledgeable staff.

KAMIS prides itself on consistently providing high quality materials and dependable service. We stand behind every product we deliver. If you are ever unsatisfied with your material, contact KAMIS for a full replacement or refund.

Kamis Inc

The entire support staff and sales engineers at KAMIS are always available during business hours to answer your technical questions and offer guidance on your projects.

In conclusion, our expertise and commitment to supplying high quality products and service has enabled KAMIS to earn thousands of satisfied customers around the world.

Sputtering Metals for Thin Film Deposits

Sputtering MetalsFind quality sputtering metals for the thin film deposition manufacturing process at Kamis. Sputtering process is used in a variety of applications such as flat panel displays, optical discs, automotive and architectural glass, web coating, hard coatings, optical communications, solar cells, semiconductors, magnetic data storage devices, electron microscopy, and decorative applications.

Typical materials used in these applications and available at Kamis are Copper, Chromium, Chromium-Molybdenum, Aluminium, Titanium, Aluminium-Titanium, Tungsten, Nickel, Silicon, Indium and Silver, amongst others. You have exact and precise purity requirements for your thin film deposition needs. The technical staff at Kamis is ready with expert knowledge to personally help you with your projects.

Sputtering process can be used for depositing thin films from a wide range of materials on to different substrates. Although process parameters make sputtering a complex process, they allow a greater degree of control over the film’s growth and structure. Consequently, Kamis knows the quality of thin film coating is a critical component and depends on obtaining unmatched purity of materials.

Call Kamis for Sputtering Metals and all your Thin Film Vacuum Coating questions.


Contact Kamis

Got specific requirements or Questions about sputtering targets, evaporation material, crucible liners, metal foil, sheet, plate, or rod and wire? The technical staff at KAMIS is ready to provide expert knowledge to assist you with your project.

Therefore, contact KAMIS today at 845-628-6173. Click the blue button below for quick answers and attention from our knowledgeable staff.

KAMIS prides itself on consistently providing high quality materials and dependable service. We stand behind every product we deliver. If you are ever unsatisfied with your material, contact KAMIS for a full replacement or refund.

Kamis Inc

The entire support staff and sales engineers at KAMIS are always available during business hours. Call us to answer your technical questions and offer guidance on your projects.

Finally, our expertise and commitment to supplying high quality products and service has enabled KAMIS to earn thousands of satisfied customers around the world.

Thin Film Deposition Vacuum Process

Thin Film DepositionThe vacuum process of thin film deposition involves the application of coatings of pure materials over the surface of different objects. The thickness of coatings or films typically possess a range of microns and angstroms. Therefore, they can be of single material or a layered structure of multiple materials.

Using quartz crystal monitoring, there are basic principles used to control the thickness and rate of thin film deposition. Secondly, this process is effectively used for many component products like cell phones, screen displays and even eyeglasses. Over the surface pure materials are applied as coatings on varied objects.

The key class of deposition methods is evaporation which involves heating a solid material within a high vacuum chamber in which vapor pressure is produced. Consequently, relatively low vapor pressure is adequate to raise a vapor cloud within the vacuum chamber, which is then condensed over surfaces as a coating or film.

Call Kamis for all your Thin Film Coating questions.


Contact Kamis

Got specific requirements or Questions about sputtering targets, evaporation material, crucible liners, metal foil, sheet, plate, or rod and wire? The technical staff at KAMIS is ready to provide expert knowledge to assist you with your project.

Therefore, contact KAMIS today at 845-628-6173. Click the blue button below for quick answers and attention from our knowledgeable staff.

KAMIS prides itself on consistently providing high quality materials and dependable service. We stand behind every product we deliver. If you are ever unsatisfied with your material, contact KAMIS for a full replacement or refund.

Kamis Inc

The entire support staff and sales engineers at KAMIS are always available during business hours. Call us to answer your technical questions and offer guidance on your projects.

Finally, our expertise and commitment to supplying high quality products and service has enabled KAMIS to earn thousands of satisfied customers around the world.